How to Improve the Growth of the Grow Tent Skeleton

Grow Tent skeleton is the most worrying thing, that is, its insulation. Especially in the bad weather, how can we improve the growth of the Grow Tent skeleton? Here is the main way to improve the incubation of Grow Tent skeleton.

The span of the Grow Tent skeleton is an important factor in determining the insulation performance. The distance from the front corner to the back wall is the span of the Grow Tent skeleton. The size of the span is related to the type and height. Reasonable high span ratio should reach more than 0.5. In the north latitude 40 ° area, the span is 6 meters is appropriate, 40 ° south of the region to 7 meters is appropriate.

In order to reduce the heat, it is best to use small thermal conductivity of building materials. In the construction of Grow Tent skeleton, the wall using heterogeneous composite wall is the most reasonable, the wall with a large heat absorption coefficient of materials to increase the wall of the heat absorption and storage capacity, so that the night temperature is not too low; The use of good insulation properties of materials to prevent heat loss.

Grow Tent skeleton wall thickness, should reach the local permafrost layer thickness, such as not reach, can be in the wall outside the soil, but also in the wall outside the wind barrier, between the wall and the wind barrier filled with rice Shell, etc., the total requirement is not to make the wall inside the frost.
Today, Grow Tent is becoming more and more hot in agriculture, so there are more and more companies engaged in the Grow Tent skeleton processing industry, and many of them are specialized in the Grow Tent skeleton processing plant, and the current technological level is constantly innovating. Will use the most advanced equipment for the cool tiger to create the most cost-effective Grow Tent skeleton. Grow Tent skeleton processing can be any continuous building with the roof, with high roof, large space, wide field of vision, saving land, easy to mechanized operations and so on. The frame column with hot-dip galvanized rectangular steel pipe, high structural strength.

Grow Tent skeleton processing is the use of hot-dip galvanizing pipe to the molten metal and iron matrix phase reaction to produce alloy layer, so that the combination of the matrix and the coating, so that its cost-effective. In general, the hot-dip galvanized pipe supplied by the Grow Tent skeleton processing plant is the first to pick up the steel pipe, in order to remove iron oxide from the surface of the steel pipe, pickled with ammonium chloride or zinc chloride aqueous solution or ammonium chloride and chlorine Zinc in a mixed aqueous solution, and then fed into a hot dip bath. And we all know that hot galvanized with uniform coating, strong adhesion, long life and other advantages. Therefore, the hot-dip galvanized steel pipe matrix used by the Grow Tent skeleton processing has a complicated physical and chemical reaction with the molten bath to form a corrosion-resistant zinc-iron alloy layer. Alloy layer and pure zinc layer, the steel pipe into one body, its corrosion resistance, and is not easy to cause damage in the rain and snow.

Grow Tent skeleton shape and material specifications are rigorously designed to ensure compliance with building standards and durability requirements. Structural calculation to ensure the reliability of the structure, the thickness of various profiles in addition to considering the strength to meet the full consideration of the role of corrosion, corrosion. It has been proved that the stability and strength of the structure have reached the standard. Steel quality in line with GB700-88 relevant standards, beautiful appearance of modern, easy installation, the overall processing of white materials in high humidity is not easy to rust, anti-condensation performance, cost modest.

The Grow Tent a new type of skeleton made with specially made cement and steel. This kind of Grow Tent is strong in compressive strength and durable, and it is durable, disposable stand, no need for annual recovery, service life of 15 to 20 years, up to 30 years, more importantly, winter and spring is not afraid of the wind Damage, summer can also be used for planting melon vegetables scaffolding.

Second, the annual change in the shed on the old bamboo in the maintenance of Grow Tent, year after year to replace the old bamboo bamboo, according to the two arch Xinzhu folder arch of the proportion of old bamboo replacement, so that year after year to eliminate part of the long life, Pressure of the old bamboo, is conducive to prevent the wind damage.

Third, do not use the tension of the old film Some farmers in order to save investment, will use years of tension without the old film repeated use. This old studio film is poor wind resistance, wind blowing easily broken. It is recommended not to use this film as a ceiling, but can be used to make Grow Tent inside the small shed.

Fourth, the compaction of the foot film side Grow Tent cover film, both sides to dig a good dicing groove, the film will be tightened feet, and with the soil cover compaction, such as the soil is too dry, may be appropriate to sprinkle water with feet, To prevent the foot film was off the wind.